header-grafik-pi-overview
You are here:
NEU: Thermal Imager optris PI 05M

Product Program

  • Overview
  • Technical details
  • Applications
  • Datasheets & manuals
  • Software

Infrared camera for the metal industry up to 2000 °C

The spectral range of 500 to 540 nm of the newly developed thermal imager optris® PI 05M decreases measurement errors resulting from unknown or changing emissivities. Due to the spectral range as well as the continous measurement range from 900 to 2000 °C, the compact infrared camera is perfectly suited for temperature measurements of molten metals.

The frame rate of 1 kHz as well as the high optical resolution enable an optimal adaption to the respective application.

Important specifications

  • High dynamic CMOS detector with up to 764 x 480 pixels resolution
  • Wide measurement range:
    900 °C to 2000 °C without sub-ranges
  • Up to 1 kHz frame rate for fast processes
  • Real-time analog output with 1 ms response time
  • Extensive software package and SDK included
  • 1 kHz linescanning function possible
  • 3.700,- EUR (plus VAT)

Product configurator

Technical details of the optris PI 05M

 

  • Scope of supply:

    USB camera incl. 1 lens,
    Lens tube with protective window,

    USB cable (1 m),
    table tripod,
    PIF cable incl. terminal block (1 m),
    software package optris PI Connect,
    carrying case Alu
    optional: CoolingJacket, high temperature cable

  • Detector: CMOS (15 μm x 15 μm)
  • Optical resolution (switchable)/ Frame rate:
    764 x 480 pixels @ 32 Hz
    382 x 288 pixels @ 80 Hz (swichable to 27 Hz)
    72 x 56 pixels @ 1 kHz
    764 x 8 pixels @ 1 kHz (fast linescanning mode)
  • Spectral range: 500 ... 540 nm
  • Temperature ranges:
     900 ... 2000 °C (27 Hz mode)
     950 ... 2000 °C (80 Hz and 32 Hz mode)
    1100 ... 2000 °C (1 kHz mode)
  • Optics:
    FOV @ 382 x 288 px:
    13° x 10° (f = 25 mm)

    FOV @ 764 x 480 px:
    26° x 16° (f = 25 mm)
  • Thermal sensitivity (NETD)1): < 2 K (1400 °C) for 27 Hz, 32 Hz and 80 Hz
                                                   < 2.5 K (1400 °C) for 1 kHz
  • Accuracy: ±1.5 % of reading
  • PC interface: USB 2.0 / optional USB to GigE (PoE) conversion
  • High speed analog output (@ 1 kHz mode):
    0 – 10 V real-time output of 8x8 pixels (1 ms response time)

  • Standard Process interface (PIF):
    0 – 10 V input, digital input (max. 24 V), 0 – 10 V output
  • Industrial process interface (PIF): 
    2x 0-10 V inputs, digital input (max. 24 V), 3x 0 – 10 V outputs,
    3x relay (0 – 30 V/ 400 mA), fail-safe relays

  • Cable length (USB):

    1 m (standard), 5 m, 10 m
    5 m and 10 m also available as HT cable (180 °C)

  • Ambient temperature (TAmb): 5 ... 50 °C
  • Storage temperature: -40 ... 70 °C
  • Relative humidity: 20 - 80%, non-condensing
  • Enclosure (size/ rating): 46 mm x 56 mm x 90 mm / IP 67 (NEMA 4)2)
  • Weight: 320 g, incl. lens
  • Shock3): IEC 60068-2-27 (25 g and 50 g)
  • Vibration3): IEC 60068-2-6 (sinus-shaped)/ IEC 60068-2-64 (broadband noise)
  • Tripod mount: 1/4-20 UNC
  • Power supply: USB 

1) at 27 Hz, 32 Hz and 80 Hz 
2) Only applies when lens protection tube is used 
3) For more details see operator‘s manual 

Product configurator

Areas of application for the thermal imager optris PI 05M

The short-waved infrared camera optris PI 05M is ideally suited for laser processing applications as radiation above 540 nm is blocked excellently. The new spectral range of 500 nm is less likely to be influenced by surrounding influences and thus ensures a precise measurement even when facing changing emissivity. The PI 05M is therefore perfectly suited for the temperature measurement of molten metals.

 

Product configurator

Thermography software optris PI Connect included

All IR cameras are delivered with the thermography software optris PI Connect, which has been developed specifically for the extensive documentation and analysis of thermal images. It allows you to analyse temperature data in real time as well as the remote control of your infrared camera. Furthermore, you can setup individual alarm levels for your process and define visual or acustic alarm signals.

Our thermography software is licence free and can easily be adjusted to your requirements. 

Product configurator