Our website uses cookies for statistical evaluation and improvement of our service.
Data Protection
header-grafik-pi-overview
You are here: Optris USProductsInfrared CamerasPI Precision LinePI 1M for metalProduct configurator PI 1M

Product configurator / Price / Quote

Short wavelength infrared camera optris PI 1MShort-wave IR camera optris PI 1M G7 from 3870 $

The newly developed thermal camera optris® PI 1M is especially suited for temperature measurements of metals, as these exhibit a distinctly higher emissivity at the short measurement wavelength of 1μm than at measurements in the previously conventional wavelength range of 8-14 μm.

In parallel with the visualization of a thermal process, the high-performance sensor electronics allow a short reaction time of 1ms for the displaying of the temperature information of the center pixel.

Your inquiry

$ 4,200.00Price valid in U.S. market. Contact Optris IR Sensing (sales@Optris-IR.com) for a formal quotation or order placement. Shipping charges from Portsmouth, NH to U.S. destinations will be pre-paid and added to invoice. Customer responsible for state and local taxes.

Possible configuration



Standard scope of delivery
PI camera, one selectable lens, 1 m USB cable, table tripod, process interface cable incl. terminal block, software package PIX Connect, operators manual, carrying case (Alu)

Choose accessories

Connection Cables

High temperature USB cable for thermal imagers (250 °C), 10 m with pre-installed cable gland M25x1,5 for usage with CoolingJacket Advanced (the usage of the process interface with the CoolingJacket Advanced is only possible in combination with the 5m- or with a high temperature USB cable.)
USB  cable for IR cameras, 1 m
USB  cable for IR cameras, 3 m
USB cable, 5 m for thermal imagers of the optris PI series
USB cable, 5 m with right angle connector
USB cable, 10 m
USB cable with right angle connector for thermal imagers, 10 m, not suitable for outdoor applications
USB  cable for IR cameras, 20 m
USB-Kabel für Wärmebildkameras, 20 m, schleppkettentauglich, einsetzbar im Außenbereich und mit vorinstallierter Kabelverschraubung M20x1, 5 / 2x4 für die Verwendung im Cooling Jacket. Die Verwendung des Prozess-Interfaces mit dem Cooling Jacket ist nur in Kombination mit einem Hochtemperatur-USB-Kabel möglich.
USB cable for thermal imagers, 20 m, suitable for cable carriers and outdoor applications
High temperature USB cable for thermal imagers (250 °C), 5 m
High temperature USB cable for thermal imagers (250 °C), 5 m with right angle connector
High temperature USB cable for thermal imagers (250 °C), 10 m
High temperature USB cable for thermal imagers (250 °C), 10 m with right angle connector
USB cable for thermal imagers, 20 m with right angle connector, suitable for cable carriers and outdoor applications
USB cable, 20 m with right angle connector for thermal imagers, 20 m, not suitable for outdoor applications
USB cable for thermal imagers, 10 m with pre-installed cable gland M20x1,5/ 2x4 for usage with cooling jacket. The usage of the process interface with the cooling jacket is only possible in combination with the 5m- or with a high temperature-USB cable.
USB cable for thermal imagers, 20 m with pre-installed cable gland M20x1,5/ 2x4 for usage with cooling jacket. The usage of the process interface with the cooling jacket is only possible in combination with the 5m or with a high temperature USB cable.

Mechanical accessories

Lens protective grid for CoolingJacket Advanced, mesh size 3, 15 mm, not usable for PI with 48° lens
Lens protective grid for CoolingJacket Advanced, mesh size 2 mm, not usable for PI with 48° lens, stainless steel
Pipe flange M48, fitting to sighting tubes with M48x1, 5 threads, stainless steel
Right angle connector for the industrial process interface
Mounting flange for CoolingJacket Advanced
CoolingJacket Advanced focusing unit for OF50 lens (PI 1M)
CoolingJacket Advanced focusing unit for OF75 lens (PI 1M)
Protective window (50,8 x 3 mm/ Borofloat 33) for PI1M/ 08M
Protective window (67 x 3 mm/ Borofloat 33) for PI1M/ 08M
Table-top tripod for optris PI thermal imager and the portable thermometer optris MS
Air purge laminar for CoolingJacket Advanced for standard IR camera applications, fitting to all focusing units with production date ≥ 01/2018
Air purge laminar for CoolingJacket Advanced for line scanning applications.
CoolingJacket Advanced focusing unit for OF25 lens (PI 1M/ PI 08M/ PI 05M)
CoolingJacket Advanced focusing unit for OF16 lens (PI 1M)
Mounting bracket for cooling jacket, adjustable in one axis, stainless steel
Mounting bracket for cooling jacket, adjustable in two axes, stainless steel

Protection

Universal protection housing for ambient temperatures up to 315 °C, Extended version incl. mounting support for USB Server Gigabit, mounting support for industrial process interface (ACCJAPIPIFMA)

Related accessories

High temperature Ethernet cable Cat.6 (250°C), 20 m
High temperature Ethernet cable Cat.6 (250°C), 10 m
High temperature Ethernet cable Cat.6 (180°C), 20 m
High temperature Ethernet cable Cat.6 (180°C), 10 m
Protective window (67 x 3 mm/ Borofloat 33) for PI1M/ 08M
Protective window (50,8 x 3 mm/ Borofloat 33) for PI1M/ 08M
Air purge laminar for CoolingJacket Advanced for line scanning applications.
Air purge laminar for CoolingJacket Advanced for standard IR camera applications, fitting to all focusing units with production date ≥ 01/2018
Mounting flange for CoolingJacket Advanced
Industrial Process interface PI/ Xi 400 for integration into CoolingJacket Advanced
CoolingJacket Advanced focusing unit for OF75 lens (PI 1M)
CoolingJacket Advanced focusing unit for OF50 lens (PI 1M)
CoolingJacket Advanced focusing unit for OF25 lens (PI 1M/ PI 08M/ PI 05M)
CoolingJacket Advanced focusing unit for OF16 lens (PI 1M)
Lens protective grid for CoolingJacket Advanced, mesh size 2 mm, not usable for PI with 48° lens, stainless steel
Lens protective grid for CoolingJacket Advanced, mesh size 3, 15 mm, not usable for PI with 48° lens
High temperature USB cable for thermal imagers (250 °C), 10 m with pre-installed cable gland M25x1,5 for usage with CoolingJacket Advanced (the usage of the process interface with the CoolingJacket Advanced is only possible in combination with the 5m- or with a high temperature USB cable.)
Universal protection housing for ambient temperatures up to 315 °C, Extended version incl. mounting support for PI NetBox, 25 cm USB cable with USB-A-right angle connector, mounting support for industrial process interface (ACCJAPIPIFMA)

Related accessories

High temperature Ethernet cable Cat.6 (250°C), 20 m with right angle RJ45 connector on one side
High temperature Ethernet cable Cat.6 (250°C), 10 m with right angle RJ45 connector on one side
High temperature Ethernet cable Cat.6 (180°C), 20 m with right angle RJ45 connector on one side
High temperature Ethernet cable Cat.6 (180°C), 10 m with right angle RJ45 connector on one side
High temperature Ethernet cable Cat.6 (250°C), 20 m
High temperature Ethernet cable Cat.6 (250°C), 10 m
High temperature Ethernet cable Cat.6 (180°C), 20 m
High temperature Ethernet cable Cat.6 (180°C), 10 m
Protective window (67 x 3 mm/ Borofloat 33) for PI1M/ 08M
Protective window (50,8 x 3 mm/ Borofloat 33) for PI1M/ 08M
Air purge laminar for CoolingJacket Advanced for line scanning applications.
Air purge laminar for CoolingJacket Advanced for standard IR camera applications, fitting to all focusing units with production date ≥ 01/2018
Mounting flange for CoolingJacket Advanced
Industrial Process interface PI/ Xi 400 for integration into CoolingJacket Advanced
CoolingJacket Advanced focusing unit for OF75 lens (PI 1M)
CoolingJacket Advanced focusing unit for OF50 lens (PI 1M)
CoolingJacket Advanced focusing unit for OF25 lens (PI 1M/ PI 08M/ PI 05M)
CoolingJacket Advanced focusing unit for OF16 lens (PI 1M)
Lens protective grid for CoolingJacket Advanced, mesh size 2 mm, not usable for PI with 48° lens, stainless steel
Lens protective grid for CoolingJacket Advanced, mesh size 3, 15 mm, not usable for PI with 48° lens
High temperature USB cable for thermal imagers (250 °C), 10 m with pre-installed cable gland M25x1,5 for usage with CoolingJacket Advanced (the usage of the process interface with the CoolingJacket Advanced is only possible in combination with the 5m- or with a high temperature USB cable.)
Outdoor protective housing for PI1M (up to 90° FOV), for USB Server and for Industrial Process interface with integrated heater, incl. prot. window (Borofloat) and air purge collar/ 24 V DC
Protective housing for USB-Server Gigabit, IP65
Protective housing for USB-Server Industry Isochron, IP65 incl. industrial power supply
Outdoor protective housing for PI (up to 90° FOV), for USB Server and for Industrial Process interface with integrated heater, incl. prot. window (plastic film/ 3 spare films) and air purge collar/24 V DC
Outdoor protective housing for PI (up to 90° FOV), for USB Server and for Industrial Process interface with integrated heater, incl. prot. window (Germanium) and air purge collar/ 24 V DC

Interfaces

Industrial process interface with connection box (IP65), 500 VACRMS isolation voltage between PI and process, 5 m standard cable
Industrial process interface with connection box (IP65), 500 VACRMS isolation voltage between PI and process, 5 m high temperature cable (up to 180°C Tamb)
Industrial process interface with connection box (IP65), 500 VACRMS isolation voltage between PI and process, 5 m high temperature cable (up to 250°C Tamb)
Industrial process interface with connection box (IP65), 500 VACRMS isolation voltage between PI and process, 10 m standard cable
Industrial process interface with connection box (IP65), 500 VACRMS isolation voltage between PI and process, 10 m high temperature cable (up to 180°C Tamb)
Industrial process interface with connection box (IP65), 500 VACRMS isolation voltage between PI and process, 10 m high temperature cable (up to 250°C Tamb)
Industrial process interface with connection box (IP65), 500 VACeff isolation voltage between PI and process, 20 m standard cable
Industrial process interface with connection box (IP65), 500 VACRMS Isolation voltage between PI and process, 20 m high temperature cable (up to 180 °C Tamb)
Industrial process interface with connection box (IP65), 500 VACRMS Isolation voltage between PI and process, 20 m high temperature cable (up to 250°C Tamb)
USB Server Gigabit: USB-Ethernet converter for 4xx series incl. 24 VDC power supply
PoE injector for PI NetBox or USB-Server Gigabit
Standard process interface with right angle connector
High temperature Ethernet cable Cat.6 (180°C), 10 m
Standard process interface with pre-installed cable gland M20x1,5 / 2x4 for usage in cooling jacket
Industrial Process interface PI/ Xi 400 for integration into CoolingJacket Advanced
High temperature Ethernet cable Cat.6 (180°C), 20 m
High temperature Ethernet cable Cat.6 (250°C), 10 m
High temperature Ethernet cable Cat.6 (250°C), 20 m
High temperature Ethernet cable Cat.6 (180°C), 10 m with right angle RJ45 connector on one side
High temperature Ethernet cable Cat.6 (180°C), 20 m with right angle RJ45 connector on one side
High temperature Ethernet cable Cat.6 (250°C), 10 m with right angle RJ45 connector on one side
High temperature Ethernet cable Cat.6 (250°C), 20 m with right angle RJ45 connector on one side

Individual configuration

Model: optris PI 1M

Lens: 20° x 15° / f=16 mm

Choose accessories:

Price$ 4,200.00

Price valid in U.S. market. Contact Optris IR Sensing (sales@Optris-IR.com) for a formal quotation or order placement. Shipping charges from Portsmouth, NH to U.S. destinations will be pre-paid and added to invoice. Customer responsible for state and local taxes.

In order to provide the best possible service, please confirm your location!